Hydraualic Vacuum Emulsifying Machine stainless Steel Homogenizer Mixer High Shear Mixer
Structure:
1. Cover Accessories
Various of cover accessories:Material inlet,fragrance hopper,air filter,vacuum pressure gauge&protector, view window,LED light,etc
2. Mixing paddle
Top wall-scraper mixer 0-60RPM, speed VFD adjustable.
3. High shear homogenizer
Bottom installed homogenizer,speed 0-3600rpm,make pretty and high-end emulsion product
4. Button Control Box
All functions clearly show on the control box, easier to operate, suitable for green hands
5. Homogenizer
High-speed homogenization allows the product to be fully mixed, emulsified, dispersed and homogenized
6. Oil tank and Water tank
Pre-treatment System Water phase and oil phase pot to pre-heat and disperse the raw materials, then transfer them to main pot to begin production.
Specific parameter requirements of emulsifier:
| 10L emulsifying pot |
Specific parameters |
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching water phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Matching oil phase pot |
|
| Enclosure material/thickness |
304L/3mm |
| Inner Layer Material/Thickness |
316L/3 mm |
| Sandwich material/thickness |
304L/3 mm |
| Design capacity |
10L |
| Working capacity |
8L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Service life |
Over 10 years |
| Homogenizer power |
0.55 KW |
| Homogenizer speed |
2800 |
| Homogenization mode |
Upper homogenization |
| Lid opening method |
Manual or electric |
| Heating method |
Electric heating |
| Discharge method |
Inclined discharge |
| Sandwich operating pressure |
0.3 MPa |
| Vacuum degree in the pot |
-0.09 MPa |
| Overall dimensions (m) |
0.8*0.55*1.43 |
| Wearing parts |
1 year spare parts. spare parts |
| Warranty Period |
More than 1 year |
| Installation and |
The supplier is responsible for commissioning |
| Matching water phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Sandwich operating pressure |
0.3 MPa |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Down stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
| Matching oil phase pot |
|
| Design capacity |
5L |
| Working capacity |
4L |
| Enclosure material/thickness |
304L/Standard |
| Inner Layer Material/Thickness |
316L/Standard |
| Sandwich material/thickness |
304L/Standard |
| Lid opening method |
Movable lid opening |
| Heating method |
Electric heating |
| Discharge method |
Upper suction material |
| Stirring mode |
Upper (lower) stirring |
| Stirring power |
0.025 KW |
| Stirring speed |
1440r/min |
Other specific requirements:
1.The equipment is accompanied by the product manual.
2.The supplier provides equipment assembly drawings and pipeline installation drawings. When the equipment needs maintenance, the buyer shall notify the supplier in writing, and the supplier will arrive within 2 days after receiving the notice to ensure timely after-sales service.
3.Equipment. Supplier warranty for one year, lifetime maintenance.
4.This annex has the same legal effect as the contract.
5.The inner wall of the pot (316L) requires mirror polishing 300 mesh, equipment size:
6. Various pipelines are required to be made of stainless steel (316L material is required for the contact material part)
7. Dead weight of 10L emulsifier: about 500Kg
Product Tags:
|
|
Dispersing Hydraualic Vacuum High Shear Emulsifier Stainless Steel Emulsifier Homogenizer Images
|
